SMA Communit-10 - Manual (Page 32)

6 Electrical Connection SMA Solar Technology AG
32 Communit-IA-A1-en-22 Installation Manual
8. Insert the cable organizer in the enclosure. Make sure that the
white arrow of the cable organizer is pointing towards the white
arrow on the enclosure.
☑ The cable organizer snaps into place.
9. Push the folding parts of the enclosure back together using a suitable pair of pliers (e.g. pipe wrench).
☑ The folding parts of the enclosure snap into place.
10. Secure the cable retainer of the enclosure with a cable tie.
11. Cut off the protruding end of the cable tie.
12. Connect the keystone jack to the network cable on the patch panel.
13. Use the patch cable to connect the patch panel to the network switch.