SMA Replacement of SMA Devices in Systems with SMA - Manual (Page 21)

SMA Solar Technology AG 9 System with Sunny WebBox with BLUETOOTH
Installation Manual Geraeteaustausch-IA-en-20 21
9.3 Replacing the Sunny WebBox with BLUETOOTH
Requirement:
☐ The software Sunny WebBox Assistant must be installed on the computer (available free of charge at
www.SMA-Solar.com).
Procedure:
1. If you are using Sunny Portal and if the Sunny WebBox with BLUETOOTH to be replaced still allows it, transfer the
data saved to the Sunny WebBox with BLUETOOTH to Sunny Portal before replacing the Sunny WebBox with
BLUETOOTH:
• Log into the user interface of the Sunny WebBox with BLUETOOTH.
• Select the Sunny WebBox with BLUETOOTH in the system tree.
• Select Settings > Sunny Portal > [Edit].
• In the Basic settings area select Every 15 minutes in the drop-down list Upload frequency.
• Select [Save]. The saving process may take a few minutes.
• Select [Logout] in the toolbar and wait 20 minutes. This will ensure that the data transmission between
Sunny WebBox with BLUETOOTH and Sunny Portal has been terminated.
2. Decommission the Sunny WebBox with BLUETOOTH to be replaced (see the Sunny WebBox with BLUETOOTH
installation manual).
3. Start the Sunny WebBox Assistant on the computer and connect the Sunny WebBox with BLUETOOTH (see help of
the Sunny WebBox Assistant or quick reference guide on the commissioning of the Sunny WebBox with
BLUETOOTH).
4. Select [Next].
☑ The Sunny WebBox search is starting. The new Sunny WebBox with BLUETOOTH is displayed.
5. Select the new Sunny WebBox with BLUETOOTH and select [Configure the WebBox].
6. Log in with the user group Installer and the associated password.
7. Select [Next].
8. Activate the option Replace Sunny WebBox.
9. Select [Next] and follow the Sunny WebBox Assistant instructions.
10. Determine the PV system identifier of the existing Sunny Portal system with Sunny WebBox with BLUETOOTH:
• Log into Sunny Portal and call up the Sunny Portal system.
• Select Configuration > PV System Properties > PV System Data.
• Copy the PV system identifier from the field PV System Identifier into the clipboard.
11. Configure the Sunny Portal settings in the new Sunny WebBox with BLUETOOTH:
• Log into the user interface of the Sunny WebBox with BLUETOOTH.
• Select Settings > Sunny Portal > [Next].
• Paste the PV system identifier from the clipboard into the field PV System Identifier.
• Select the entry Yes in the drop-down list Use Sunny Portal.
• Select [Save].
• Select [Logout] in the toolbar.
12. In Sunny Portal replace the Sunny WebBox with BLUETOOTH in the Sunny Portal system:
• Log into Sunny Portal and call up the Sunny Portal system.
• The Sunny Portal recognizes the new Sunny WebBox with BLUETOOTH and opens the configuration wizard
automatically. To open the configuration wizard manually, select Name of your system > System monitoring
> Set up device now.
• Select in the row of the new Sunny WebBox with BLUETOOTH and follow the configuration wizard
instructions.