SMA Replacement of SMA Devices in Systems with SMA - Manual (Page 12)

6 Sunny Home Manager System SMA Solar Technology AG
12 Geraeteaustausch-IA-en-20 Installation Manual
6.5 Replacing the Sunny Home Manager
1. Decommission the Sunny Home Manager to be replaced (see the Sunny Home Manager installation manual).
Tip: Label the plugs or cables of the energy meters with the respective name of the connection of the
Sunny Home Manager (e.g. meter 1/D0).
2. Commission the new Sunny Home Manager:
• Turn the NetID rotary switch to the NetID of the system using a screwdriver (blade width: 2.5 mm).
Tip: Check which NetID has been set on the SMA radio-controlled sockets of the system.
• Connect the connector plugs of the energy meters to the Sunny Home Manager (see the installation manual of
the Sunny Home Manager).
• Plug the network cable in the network terminal of the Sunny Home Manager (see the installation manual of the
Sunny Home Manager).
• Connect the voltage supply to the Sunny Home Manager (see the installation manual of the
Sunny Home Manager).
☑ The status LED ( ) of the Sunny Home Manager first glows red, and then flashes red. After approximately two
minutes, the status LED is intermittently flashing green and orange. The Sunny Home Manager is connected to
Sunny Portal.
✖ The status LED is not intermittently flashing green and orange?
It is possible that the Sunny Home Manager is not correctly connected to the router.
• Ensure that the Sunny Home Manager is connected to the router correctly (see the installation manual of the
Sunny Home Manager).
3. Keep the serial number and the registration ID of the new Sunny Home Manager ready. The data are indicated on
the type label on the back of the Sunny Home Manager or on the cover of the CD supplied.
4. Go to www.SunnyPortal.com/Register.
☑ The PV System Setup Assistant opens.
5. Select [Next] and activate the option I am already registered in Sunny Portal.
6. Enter the login data of the Sunny Portal system and select [Next].
7. Select the option Add or replace devices.
8. Select in the row of the system whose Sunny Home Manager you want to replace.
9. Enter the serial number of the new Sunny Home Manager in the PIC field. Enter the registration ID of the new
Sunny Home Manager in the RID field.
10. Select [Identify].
☑ Sunny Portal checks whether the serial number and registration ID correspond to the connected
Sunny Home Manager.
✖ The PV System Setup Assistant cannot find any Sunny Home Manager with the serial number and registration ID?
• Rectify the error (see the Sunny Home Manager user manual).
11. Select [Next].
12. Select [Finish].