SMA 20000TL Installation - Manual (Page 34)

8 Decommissioning SMA Solar Technology AG
34 PCONTROLMOD-IA-en-15 Installation Manual
3. Remove the plug of the module ribbon cable from
the pin connector on the display assembly.
4. Loosen the screw on the module and remove the module from the inverter.
5. Install the display:
• (1) Plug the ribbon cable plug into the pin
connector on the display assembly.
• (2) Push the display into the right-hand retainer.
• (3)Push the display into the left-hand retainer.
6. Close the inverter (see inverter manual).