SMA 20000TL Installation - Manual (Page 16)

5 Electrical Connection SMA Solar Technology AG
16 PCONTROLMOD-IA-en-15 Installation Manual
3. Insert the ribbon cable of the module into the pin
connector on the display assembly.
4. Insert the module into the inverter. Insert the
left-hand key on the module into the hole in the
plastic retainer for the display assembly.
5. Use an Allen key (AF 3) to fasten the screw to the
module (torque: 1.5 Nm)
6. Install the display:
• (1) Plug the ribbon cable plug into the pin
connector on the display assembly.
• (2) Push the display into the right-hand retainer.
• (3) Push the display into the left-hand retainer.