HEIDENHAIN IK-115 - Manual (Page 8)

,QLWLDO 2SHUDWLRQ RI WKH ,.
Examples:
Base address Address range 1 2 3 4 5 6
210H 210H - 21FH OFF ON ON ON ON OFF
220H 220H - 22FH OFF ON ON ON OFF ON
280H 280H - 28FH OFF ON OFF ON ON ON
300H 300H - 30FH OFF OFF ON ON ON ON
310H (default) 310H - 31FH OFF OFF ON ON ON OFF
330H 330H - 33FH OFF OFF ON ON OFF OFF
Configuring the interrupts
Since the current software does not support interrupt
operation, no jumper is permitted on the interrupt
configuration plug X4!
Installing the IK 115
"mVF˜pO˜FdF4›p’›"›a4˜=a’4^"VF9
Be sure that the workplace and the technician are properly
grounded during installation.
Since the Adjusting and Testing Software cannot provide all
function without the IK 115 absolute value board for PCs,
HEIDENHAIN recommends installing the IK 115 in the PC
before the software. To do so, first separate the PC from its
power supply, the open the housing and remove the slot cover
in front of a vacant ISA slot. Plug the IK 115 into the ISA socket
and then reinstall the slot cover in the PC housing. Finally,
reclose the PC housing, reconnect the power cord, and switch
on the PC.