HEIDENHAIN TNC 620 (340 56x-01) - Manual (Page 91)

HEIDENHAIN TNC 620 91
4.3 W
o
rk
ing with the File Manag
e
r
Data transfer to or from an external data
medium
Call the file manager
Select the screen layout for data transfer: press the
WINDOW soft key. Select the desired directory in
both halves of the screen. In the left half of the screen
the TNC shows, for example, all files saved on its hard
disk. In the right half of the screen it shows all files
saved on the external data medium. Use the SHOW
FILES and SHOW TREE soft keys to switch between
the folder view and file view.
Use the arrow keys to highlight the file(s) that you want to transfer:
Moves the highlight up and down within a window.
Moves the highlight from the left to the right window,
and vice versa.
If you wish to copy from the TNC to the external data medium, move
the highlight in the left window to the file to be transferred.
You might have to set up the data interface before you
can transfer data to an external data medium (see
“Setting the Data Interfaces” on page 485).
Depending on the data transfer software you use,
problems can occur occasionally when you transmit data
over a serial interface. They can be overcome by repeating
the transmission.