HEIDENHAIN TNC 620 (340 56x-01) - Manual (Page 6)

6
Software options
The TNC 620 features various software options that can be enabled by
you or your machine tool builder. Each option is to be enabled
separately and contains the following respective functions:
Hardware options
Additional axis for 4 axes and closed-loop spindle
Additional axis for 5 axes and closed-loop spindle
Software option 1 (option number #08)
Cylinder surface interpolation (Cycles 27, 28 and 29)
Feed rate in mm/min on rotary axes: M116
Tilting the machining plane (Cycle 19 and 3-D ROT soft key in the
manual operating mode)
Circle in 3 axes with tilted working plane
Software option 2 (option number #09)
Block processing time 1.5 ms instead of 6 ms
5-axis interpolation
3-D machining:
„ M128: Maintaining the position of the tool tip when positioning
with tilted axes (TCPM)
„ M144: Compensating the machine’s kinematics configuration for
ACTUAL/NOMINAL positions at end of block
„ Additional finishing/roughing and tolerance for rotary axes
parameters in Cycle 32 (G62)
„ LN blocks (3-D compensation)
Touch probe function (option number #17)
Touch probe cycles
„ Compensation of tool misalignment in manual mode
„ Compensation of tool misalignment in automatic mode
„ Datum setting in manual mode
„ Datum setting in automatic mode
„ Automatic workpiece measurement
„ Automatic tool measurement