HEIDENHAIN iTNC 530 (340 49x-06) Pilot - Manual (Page 25)

25
F
unda
mentals
Creating a new directory
U Select the file manager: Press the PGM MGT key
U Use the left arrow key to select the directory tree
U Select the TNC:\ drive if you want to create a new main directory, or
select an existing directory to create a new subdirectory in it
U Enter the name of the new directory, and confirm it with the ENT key.
smarT.NC then displays a pop-up window to confirm the new path
name
U Press ENT or the Yes button to confirm. In order to cancel the
procedure, press the ESC key or the No button
Creating a new file
U Select the file manager: Press the PGM MGT key
U Select the file type of the new file, as described earlier
U Enter a file name without an extension, and confirm with ENT
U Confirm with the MM (or INCH) soft key or screen button. smarT.NC
creates a file with the selected units of measurement In order to cancel
the procedure, press the ESC key or the Cancel button
You can also create a new program with the NEW
DIRECTORY soft key. Then enter the directory name in the
pop-up window and confirm with the ENT key.
You can also create a new file with the NEW FILE soft key.
Then enter the file name in the pop-up window and confirm
with the ENT key.