HEIDENHAIN iTNC 530 (340 49x-06) Pilot - Manual (Page 14)

14
Quic
k Guide
Defining contour machining
U Insert a machining step: Press the INSERT soft key
U Inserting a machining step
U Insert contour machining: Press the CONTR. PGM soft key
for the TNC to display a soft key row with the available
contour operations
U Select contour train machining: Press the UNIT 125 soft key.
The TNC displays the form for a contour operation
U Specify tool: Press the SELECT soft key for the TNC to
display the contents of the tool table TOOL.T in a pop-up
window
U Move the highlight onto the end mill with the cursor keys
and enter it into the form with the ENT key
U Enter the spindle speed and confirm entry with the ENT key
U Enter the plunging feed rate and confirm with the ENT key
U Enter the milling feed rate and confirm with the ENT key
U Enter coordinates of workpiece upper edge, depth, infeed
depth and finishing allowance for the side and confirm each
time with the ENT key
U Select type of milling, radius compensation and type of
approach via soft keys and confirm each time with the ENT
key
U Enter the approach parameters and confirm each time with
the ENT key