HEIDENHAIN iTNC 530 (340 49x-06) Pilot - Manual (Page 18)

18
F
unda
mentals
Selecting the new operating mode the first time
U Select the smarT.NC operating mode: The file manager
of the TNC appears
U Select one of the available example programs with the
arrow keys and press ENTER, or
U In order to write a new machining program, press the
NEW FILE soft key. smarT.NC opens a pop-up window
U Enter a file name with the extension .HU, and confirm
with ENT
U Confirm with the MM (or INCH) soft key or screen
button. smarT.NC creates an .HU program with the
selected units of measurement and automatically inserts
the program header form
U The data for the program header form are mandatory,
since they are globally valid for the entire machining
program. The default values are specified internally.
Change the data if necessary, and save them with the
END key
U In order to define machining steps, press the EDIT soft
key to select the desired machining step