HEIDENHAIN ND 930 - Manual (Page 27)

27
3 0
NOML. VALUE Zs=
Enter the nominal value for Zs (such as –30 mm)
and confirm with the arrow down key.
START ?
Press ENT to start the multipass cycle. Use the
arrow down key if you need to correct your
entries.
ENT
SPEC
FCT
End the multipass cycle.
• When the multipass cycle is activated, the ND 970
automatically switches to the sum display.
• Use the CL key to go back one level in the special functions.
MOVE AXES
If you confirmed START with the ENT key, you
can now turn the shoulder in any number of
infeeds by moving to display value zero.
Multipass Cycle