HEIDENHAIN ND 930 - Manual (Page 17)

17
ENT 2 1
HOLD
POS
HOLD
POS
ENT
X
Holding Positions
If you want to measure the workpiece after turning the first diameter,
your display unit has to capability to “freeze” (hold) the actual position
before you retract the tool.
Turn the first diameter, for example in the X
axis.
Select the HOLD POSITION function.
KEEP X POS. ?
Select the axis (for example X) whose position is
to be held, and confirm with ENT.
Retract the tool. The X axis display remains
stopped. Measure the workpiece.
SET POS. X =
Enter the measured position, for example
12 mm, and confirm with ENT. The display
shows the current tool position.
End the function.
Holding Positions
?
1
Z
?
X
2