Grass Valley SCRIPT Viewer News Rev.A - Manual (Page 47)

TM Page 45
Testing PVTV SCRIPT Viewer - STUDIO Functionality
This section is intended to guide you through a basic functional test of the optional PVTV SCRIPT Viewer teleprompting
system, and its operation within PVTV STUDIO. If your system does not include PVTV STUDIO, proceed to the next topic.
For complete operational instructions on PVTV STUDIO, refer to the PVTV STUDIO Installation and Configuration Manual.
© 1999 ParkerVision, Inc. • Use Your SCRIPT Viewer™ System
This is a test script. I am only writing
this script to test the communications
between my PVTV STUDIO system,
and my PVTV SCRIPT Viewer
teleprompting
This is a test script. I am
only writing this script
to test the
communications
between my PVTV
STUDIO system, and
my PVTV SCRIPT
Viewer teleprompting
system.
The Script Viewer’s
remote machine address
should match the PVTV
STUDIO’s local machine
address and vice versa.
Double-click
here
1. Power-up PVTV STUDIO.
2. Enter “This is a test script. I am only writing this script to test the
communications between my PVTV STUDIO system, and my PVTV SCRIPT
Viewer teleprompting system” in the SCRIPTedit window.
3. On the SCRIPTedit monitor,select Show miniVIEWER Window from the
Viewer menu. The miniVIEWER window appears.
4. Double-click the miniVIEWER window. The Network Status dialog box
appears. In this box, under the Remote tab, note the contents of the
Remote Machine Address box. Also note the contents of the Local
Machine Address box under the Local tab.