Grass Valley SCRIPT Viewer News Rev.A - Manual (Page 45)

TM Page 43
Setting SCRIPTview Options
Speed Control
• Delay Adjustment: The number of units to adjust the script delay each time that the
speed adjustment is made.
• Script Delay: The number of micro-seconds delay between scan lines. A lower number
represents higher speeds.
• Minimum Delay: The fastest speed the script will scroll.
• Maximum Delay: The slowest speed the script will scroll.
To change a setting:
1. Open the SCRIPTview Options dialog box.
2. Click the Speed Control tab.
3. Enter the desired values by each setting.
4. Click [OK].
File List
The File List is activated from the keypad with the Select button. These two options
determine the type of window that displays when you press this button. Traverse the list with
the Faster/Slower buttons. Select the desired file with the Run/Pause button.
• Display 16 most recent files: A window is generated which shows the last 16 files
that were loaded into the viewer.
• Display File Directory: A window is displayed, allowing you to select files from the
directories on the hard drive. Enter the default directory to display in the Directory:
box.
To change the file list setting:
1. Open the SCRIPTview Options dialog box.
2. Click the File List tab.
3. Select a File List Option.
4. Click [OK].
© 1999 ParkerVision, Inc. • Use Your SCRIPT Viewer™ System