Grass Valley NV8288 v.1.5 - Manual (Page 21)

NV8288 and NV8288-Plus Digital Video Routers • User’s Guide 11
2. Introduction
Module Slots and Rear Connectors
Figure 2-7. NV8288-Plus Router (Rear View)
System Connections
Both the NV8288 and the NV8288-Plus feature connections for managing system functions. These
connections enable you to connect to:
• A router control system using either Ethernet or serial connectors.
• A stable source of video signal for reference purposes.
• The UniConfig application, installed on a PC, used to perform configuration tasks.
• The system alarm that sends notification of a system failure, such as a fan malfunction or power
supply failure.
• The NV6257 or the NV8000 power supply. (See Making Power Connections on page 24.)
Figure 2-8 shows the system and power connections. The ‘AUX’ and ‘TIME CODE’ connections
are not used at this time and not discussed in this manual.
RTR EXPANSION
E146905
10/100 BT
10/100 BT RTR EXPANSION
VIDEO REF 1
LOOP
VIDEO REF 2
LOOP
AUX 1
AUX 2
CTRL 1
CTRL 1
CTRL 2
CTRL 2 ALARMS
POWER SUPPLY MONITORS POWER INPUT
TIME CODE
PRI
CTRL
SEC CTRL
PRI CTRL
SEC CTRL
DIAG (38.4 Kbaud)
DIAG (38.4 Kbaud)
79 85 91 97 103 109 115 121 127 133 139 73 7 13 19 25 31 37 43 49 55 61 67
120 126 132 8 3 1 108 114 84 90 96 102 8 7 36 42 48 54 60 66 72 12 18 24 30 6
223 229 235 241 247 253 259 265 271 277 283 217 175 169 151 157 163 145 181 187 193 199 205 211
156 162 168 174 180 186 192 198 204 210 216 150 228 234 240 246 252 258 264 222 270 276 282
IN 1
IN 2
OUT 1
OUT 2
IN 1
IN 2
OUT 1
OUT 2
Expansion and
Output Connectors
Outputs 144–73
Input
Connectors
Inputs 144–1
Expansion and
Output Connectors
Outputs 72–1
Expansion and
Output Connectors
Outputs 288–217
Input
Connectors
Inputs 288–145
Expansion and
Output Connectors
Outputs 216–145
System and Power
Connectors
Monitor Connectors