beautypg.com

Figure 2-4, next, Introduction – Grass Valley NV8288 v.1.5 User Manual

Page 18

background image

8

Rev 1.5 • 24 Sep 09

2. Introduction

Module Slots and Rear Connectors

for input cards and output cards. In the upper bay are two additional slots for two control cards. In
the lower bay are two additional slots for one monitor cardset (composed of two monitor cards).
Slots contain color-coded card guides that match the color of the ejector lever on the card that is
installed in that slot. For more information, see

Active Cards

on page 15.

Located in the center of the router are two horizontal slots housing two crosspoint cards. At the top
and bottom of the router frame are two removable fan trays.

Each input card slot and output card slot, and the card it holds, manages signals received or distrib-
uted through 12 connectors. Each signal is assigned a number that corresponds to the physical input
or output connection. This means that Output Slot 1 corresponds to outputs 1-12, Output Slot 2 cor-
responds to outputs 13-24, and so on, up to 576. Similarly, Input Slot 1 corresponds to inputs 1-12,
Input Slot 2 corresponds to inputs 13-24, and so on, up to 288.

Figure 2-4. NV8288 Router with Door Removed (Front View)

For information on installing cards in module slots, see

Installing Active Cards

on page 33.

Figure 2-5 shows the rear of the NV8288. The rear contains non-interchangeable backplanes con-
taining 864 I/O DIN 1.0/2.3 connections: 288 for receiving signals and 576 for distributing signals.
Note that the outputs and inputs are numbered from right to left because the router is being viewed
from the rear.

An additional set of four DIN 1.0/2.3 connections, located in the lower, right quadrant, monitor sig-
nals. In the center region are connections for system and power functions, as shown in Figure 2-8
on page 12.

Output Cards (12)

Outputs 1–144

Input Cards (12)

Inputs 1–144

Output Cards (12)

Outputs 145–288

Control Cards (2)

Monitor

Module (1)

Output Cards (12)

Outputs 289–432

Input Cards (12)

Inputs 145–288

Output Cards (12)

Outputs 433–576

Fan Tray

Fan Tray

Crosspoint Cards (2):

Top Card (1–288)

Bottom Card (289–576)

This manual is related to the following products: