Grass Valley K2 Storage System Instruction Manual v.3.2 Nov.18 2008 - Manual (Page 381)

July 15, 2008 K2 Storage System Instruction Manual 381
Configuring the NH server - Part 2
3. Leave Windows Security unchecked.
4. Click OK . The Configuration File dialog box opens.
The configuration file for the media file system is displayed. You can verify media
file system parameters by viewing this file. Do not edit this file. Click
Accept .
A “…Please wait…” message box displays progress and a “…succeeded…”
message confirms the process is complete.
5. A message informs you that you must restart the K2 Media Server, however the
restart at the end of the Configure K2 Server wizard suffices, so you do not need to
restart now.
6. Close the Storage Utility.
NOTE: Do not attempt to bring the K2 Storage System online until instructed to do
so later in this chapter.
7. Continue with the next procedure.
Configuring the NH server - Part 2
1. Return to the Configure K2 Server page from which you launched Storage Utility
and proceed as described in the following table: