Grass Valley K2 Storage System Instruction Manual v.3.2 Nov.18 2008 - Manual (Page 170)

170 K2 Storage System Instruction Manual July 15, 2008
Chapter 4 Installing the Level 20 Storage System
Level 20 system power-on procedure
Power on Level
Level 20 (iSCSI) K2
Storage System
Power on and verify
control point PC .
Refer to page 173 for procedures.
Power on and verify
HP ProCurve switch .
Refer to page 172 for procedures.
Power on and verify
RAID devices .
Refer to page 172 for procedures.
Elapsed time: 5 minutes Elapsed time: 1 minute
Power on the
K2 Media Server .
From the control point PC, at
the command prompt, ping
the K2 Media Server.
Power on
K2 Media Clients and other
iSCSI clients .
Begin record/play operations.
Yes
Power on optional
NH servers , if any.
From the control point PC, at
the command prompt, ping
the K2 Media Server.
Yes
K2
Media Server
responds to ping?
Elapsed time:
3 minutes
No
K2 Storage System
power-on complete
K2
Media Server
responds to ping?
Elapsed time:
3 minutes
No
Begin FTP operations.