Grass Valley iTX Master Control v.2.3 - Manual (Page 28)

iTX-MC User Guide 2-18
iTX-MC system configuration
4. Select the Advanced tab and then select the Enable iTX Integration setting in the
Automation section. This causes the iTX Integration section to automatically appear.
5. In the iTX IP Address field, specify the IP address of the computer hosting the iTX
Hard Panel Controller and iTX Desktop client.
6. Select File>Write Config To Panel.
7. Click Yes when asked if you want to save the changes.
8. Click OK when the Config File Save window appears.
9. A window appears informing you that the device must be reset after a configuration
update. Click Yes to restart the device.