Grass Valley Digital Wireless Triax Camera System - Manual (Page 9)

version 9 User’s Guide - Digital Wireless System 9
In this configuration the camera communicates wirelessly
with the antenna management unit (AMU). The AMU is
connected to the Wireless Control Unit (WCU) via a triax cable.
Triax cable between AMU and WCU; maximum length is
700m (14mm), 600m (11mm) or 400m (8mm).
The WCU delivers the video signals for the studio system.
An optional second AMU with an antenna set can be added
to the system to extend the range of the camera coverage.
Configuration
LDK 4453
RF Receiver
LDK 4454
RF Data Emitter
LDK 4452
Antenna
Management
Unit (AMU)
LDK 4450
Wireless Control Unit
(WCU)
Triax
600m with
11mm Cable
Digital wireless video link
Camera to RF Receiver
Digital wireless data link
RF Data Emitter to camera
LDK 4453
RF Receiver
LDK 4454
RF Data Emitter
LDK 4452
Antenna
Management
Unit (AMU)
Triax
600m with
11mm Cable
SDI video output
to studio system
Optional second receiving set to extend the operating area
150 m max. line of sight
C2IP Network
Remote control of the camera is achieved through the C2IP
network that can be connected to the WCU. Control panels
such as the MCP 400 or OCP 400 can be used to gain full
access to the camera. Alternatively, Series 9000 control panels
can be used.