Wca connectors (cont.), 3) audio in (ch1) microphone connector, 4) audio in (ch2) microphone connector – Grass Valley Digital Wireless Triax Camera System User Manual
Page 28

28
User’s Guide - Digital Wireless System
version 9
Hirose 6-pin female; panel view
1.
Ground (Video)
2.
Video Input (1Vpp CVBS)
3.
DC Out (+11Vdc to +17 Vdc), 1.5A max.
4.
Ground (DC out)
5.
not connected
6.
Tally signal (limited current = 10 mA)
Shield of cable directly to the connector housing.
- chassis part (female): Hirose HR10A-7R-6S (3922 200 00038)
- cable part (male): Hirose HR10A-7P-6P
(1) DC power output socket
(2) DC power input socket
XLR 4-pin male; panel view
1.
Ground
2.
No connection
3.
No connection
4.
+11 Vdc . . . +17 Vdc
This socket accepts a DC voltage of 12V nominal. Maximum nominal
power consumption 38W (excluding power out socket).
CAUTION
The input voltage must not exceed +17 Vdc.
!
1
2
3
4
1
6
5
2
3
4
WCA connectors (cont.)
XLR 3-pin female
1.
Audio Screen
2.
Audio In
3.
Audio Return
Input impedance > 10 KOhm
Sensitivity range: -64 to -22 dBu or line (0dBu)
Signal at pin 2 of audio input is in phase with signal at pin 2 of audio
output. Switchable phantom power: +48 V
(3) Audio IN (CH1) microphone connector
XLR 3-pin female
1.
Audio Screen
2.
Audio In
3.
Audio Return
Input impedance > 10 KOhm
Sensitivity range: -64 to -22 dBu or line (0dBu)
Signal at pin 2 of audio input is in phase with signal at pin 2 of audio
output. Switchable phantom power: +48 V
(4) Audio IN (CH2) microphone connector
3
1
2
3
1
2