Setting up the camera adapter (cont.), Attaching the adapter to the camera – Grass Valley Digital Wireless Triax Camera System User Manual
Page 12
12
User’s Guide - Digital Wireless System
version 9
Setting up the camera adapter (cont.)
Clear
Clear
A 1
Star 4P
ND1/4
B 2
Star 6P
ND 1/16
C 3
Soft focus
ND 1/64
D 4
Attaching the adapter to the camera
Caution
Be extremely careful with the connectors between
the camera head and the adapter. Do not allow
the guide pins to damage the pins of the
connector.
Follow these steps in the order given. Tightening
the screws in the wrong order could result in
mechanical damage to the camera.
To attach an adapter to the camera proceed as follow:
a.
Using the rail
1
on the bottom of the camera head as
a guide, fit the guide pins
2
on either side of the
connector and the guide pin
3
at the top rear of the
camera head into the corresponding slots of the adapter.
b.
First, tighten the two horizontal screws
4
on the top of
camera.
c.
Next, tighten the two horizontal screws
5
at the front
of the camera.
d.
Lastly, tighten the vertical screw
6
in the handle of the
camera.
To detach an adapter from the camera head follow the steps
for attaching it in the reverse order.
Caution
Loosening the screws in the wrong order could
result in mechanical damage to the camera.
!
!
!
5
6
4
3
2
1