Grass Valley Digital Wireless Triax Camera System - Manual (Page 39)

version 9 User’s Guide - Digital Wireless System 39
Specifications
Dimensions Adapter: 191mm x 120mm x 180mm (L x W x H)
Camera head with adapter (without viewfinder):
330mm x 120mm x 205mm (L x W x H)
Weight 2.2 kg (4.8 Kg incl. camera head and 1.5-inch
viewfinder)
Operating temperature -20°C to +45°C
Storage temperature -20°C to +60°C
Power 12V DC, 42W including LDK 300 head and 1.5-inch VF
Battery plate Anton Bauer type
DC In 12V (11 to 17V); 3.5A (excluding DC Out); XLR 4
DC Out 11 to 17V (battery voltage) 1.5A; 6-pin Hirose
Video SDI monitoring quality output
VF signal B&W video 1.0 Vp-p, 75 Ohm output
Antennas RX antenna; BNC connector, RF signal input TX
antenna; SMA connector, RF signal output
RF module COFDM DVB-T modulation in 2k mode
Frequency ranges 2.2 - 2.4 GHz, 2.4 - 2.5 Ghz or 2.5 - 2.7 Ghz depending
on module
Number of channels 16 per band
Emitted Power 15 dBm ± 1.5 dBm (conducted) for 2.4 - 2.5 Ghz band
18 dBm ± 1.5 dBm (conducted) for all other bands
measured at 20°C ambient temperature
Bandwidth 7.8 MHz per channel (-3dB)
Bitrate 22 Mbit/s (wavelet compression)
Range 150m line-of-sight in open field conditions
Latency 1.5 Frame, NTSC 50mSec, Pal 60 mSec
Intercom Speech quality; latency to camera 250mS
Microphone level -44 to -24 dBu switchable
Input impedance > 10 KOhm
Telephone level +12 dBu nominal
Telephone output impedance < 50 Ohm
Audio 1 channel full bandwidth (22 kHz, S/N 63dB typical) or
2 channels reduced bandwidth (15 kHz, S/N 60dB typical)
Input impedance > 10KOhm
Sensitivity range: -64 to -22 dBu or line (0dBu)
Tally out On: +5 Vdc CMOS level
External video 1 Vpp (C)VBS input
Wireless adapter unit