Grass Valley ADVC-1000 - Manual (Page 38)

Basic Instructions Basic Instructions Basic Instructions Basic Instructions Basic Instructions
30 30 30 30 30
Basic InstructionsBasic InstructionsBasic InstructionsBasic InstructionsBasic Instructions
63 cycle master
Lets you enable or disable cycle master acquisition.
LCD Display
Setting Description
on Acquires cycle master.
(Factory default)
off Doesn't acquire cycle master.
64 resample filter Available only for NTSC
Lets you set the type of horizontal resampling filter for Cb/Cr sig-
nal, when running in NTSC mode.
LCD Display
Setting Description
default Sets default modulus.
(Factory default)
type 1 Sets modulus that emphasizes anti-alias.
type 2 Sets modulus that emphasizes frequency
characteristic.
65 AV/C transaction
Lets you select the type of the AV/C transaction at the time AV/C
command is received.
LCD Display
Setting Description
Immediate Executes AV/C immediate transaction.
(Factory default for NTSC)
Deferred Sends INTERIM response, and then executes
AV/C deferred transaction.
Info
If this menu is set to off, you can
connect ADVC-1000 units each
other using IEEE1394 cable.
Info
If this menu is set to off, advanced
setting mode "external sync" does
not work.