Grass Valley ADVC-1000 User Manual
Page 17
![background image](https://www.manualsdir.com/files/813291/content/doc017.png)
9
9
9
9
9
Basic InstructionsBasic InstructionsBasic InstructionsBasic InstructionsBasic Instructions
Basic Instructions
Basic Instructions
Basic Instructions
Basic Instructions
Basic Instructions
xxxxx
DV J
J
J
J
J
SDI
1.
DV audio input (Upper left on the screen)
32kHz/4ch > both
REC 00:00:03;22
48kHz/2ch ............. DV audio input is 48 kHz/ 16 bits/
2 channels. Digital audio output CH3
and CH4 are copies of CH1 and CH2.
32kHz/4ch ............. DV audio input is 32 kHz/ 12 bits/
4 channels.
32kHz/2ch ............. DV audio input is 32 kHz/ 16 bits/
2 channels. Digital audio output CH3
and CH4 are copies of CH1 and CH2.
44kHz/2ch ............. DV audio input is 44.1 kHz/ 16 bits/
2 channels. Digital audio output CH3
and CH4 are copies of CH1 and CH2.
No Stream ............ No DV signal input.
SG ......................... Digital audio output is either of 1 kHz/-18dB
or 1 kHz/-20 dB audio signal regardless of
DV signal input (only during built-in color
bar output).
2.
Digital audio output destination (Upper right on the screen)
32kHz/4ch > both
REC 00:00:03;22
both ...................... Same signal is output for SDI embed-
ded audio output and AES/EBU audio
output.
3.
9-pin remote control deck status (Lower left on the screen)
32kHz/4ch > both
REC 00:00:03;22
Same as during SDI J DV mode.
(See p. 8. “9-pin remote control deck status”)