Grass Valley ADVC-1000 - Manual (Page 32)

Basic Instructions Basic Instructions Basic Instructions Basic Instructions Basic Instructions
24 24 24 24 24
Basic InstructionsBasic InstructionsBasic InstructionsBasic InstructionsBasic Instructions
21 TC input source
Lets you select any of the following settings related to the method
used to read the time code from the deck in SDI J DV mode
(during DV encoding).
LCD Display
Setting Description
DVITC Acquires time code from DVITC in SDI input.
LTC Acquires time code from LTC.
Auto Acquires time code from DVITC in SDI input
and LTC. Adopts LTC if LTC is acquired,
adopts DVITC if not.
(Factory default)
22 DVITC insert line
This item contains sub-menus letting you select from among sev-
eral DVITC settings.
LCD Display
xxxxx 22-1 encode line 1
Sets line (line 1), at which to insert DVITC in SDI output, in
DV J SDI mode (during DV decoding).
Setting Description
Line selection NTSC: 10 to 20
(Factory default: 14)
PAL: 6 to 22
(Factory default: 19)
off No insertion
Info
Pressing the ENTER key displays
sub-menus. With the desired
setting selected, press the ENTER
key to apply the setting and
return to the main screen.
If you don't want to change the
setting, press the MENU key to
return to the main screen.