Grass Valley ADVC-1000 - Manual (Page 35)

27 27 27 27 27
Basic InstructionsBasic InstructionsBasic InstructionsBasic InstructionsBasic Instructions
Basic Instructions Basic Instructions Basic Instructions Basic Instructions Basic Instructions
34 audio delay
Lets you set the amount to increase/decrease (in milliseconds)
the ADVC-1000 audio output delay relative to the video output,
when an external sync is enabled.
* Pressing the ENTER key switches the screen to the mode for editing the value.
1. Move the Select key left/right to select the digit of the value you want to
change.
2. Move the Select key up/down to change the value.
3. Press the ENTER key to finish the mode for editing the value.
LCD Display
Setting Description
Numerical value Sets specified numerical value between
-100 and +100.
(Factory default: 0)
41 9P remote
Lets you select any of the following settings related to deck con-
trol by the 9-pin remote connector.
LCD Display
Setting Description
off Turns deck control by remote connector OFF.
(Factory default)
on Turns deck control by remote connector ON.
function test mode Special mode for testing. Please do not set it
to this mode in normal operations.