Grass Valley ADVC-1000 User Manual

Page 21

Basic InstructionsBasic InstructionsBasic InstructionsBasic InstructionsBasic Instructions

Basic Instructions

Error Status Screen

This screen shows error messages.

xxxxx

Error Status Screen

xxxxx

When error has occurred

Time code (Upper side on the screen)

LTC........................ LTC was selected for time code input, and

time code signal can't be detected from
TC connector during SDI J DV mode.

DVITC ................... DVITC was selected for time code input,

and DVITC can't be detected from SDI
input connector during SDI J DV mode.

TC .......................... During DV J SDI mode, time code can't

be detected from input DV signal.

autoTC .................. Auto is selected for time code input, and

time code signal can't be detected from
neither TC connector nor SDI connector
during SDI J DV mode.

Inputs (Lower side on the screen)

SDIin ..................... SDI input signal can't be detected during

SDI J DV mode. Alternately, external syn-
chronization to SDI input is set, but SDI
input signal can't be detected.

REFin .................... Unit is set to synchronize to reference sig-

nal input to REF connector, but sync sig-
nal input to REF connector can't be de-
tected.