Grass Valley ADVC-1000 - Manual (Page 34)

Basic Instructions Basic Instructions Basic Instructions Basic Instructions Basic Instructions
26 26 26 26 26
Basic InstructionsBasic InstructionsBasic InstructionsBasic InstructionsBasic Instructions
32 ext. sync source
Lets you select any of the following settings related to the source
used as the sync signal when performing external synchronization.
LCD Display
Setting Description
REF. IN Synchronizes to signal input into REF
connector.
(Factory default)
SDI IN Synchronizes to sync signal contained in
video signal input from SDI input connector.
33 ext. sync conf.
Lets you set the amount to increase/decrease (in unit of 37 nano-
seconds) the ADVC-1000 video output delay relative to the exter-
nal sync input.
* Pressing the ENTER key switches the screen to the mode for editing the value.
1. Move the Select key left/right to select the digit of the value you want to
change.
2. Move the Select key up/down to change the value.
3. Press the ENTER key to finish the mode for editing the value.
LCD Display
Setting Description
Numerical value Sets specified numerical value between
-1,024 and +1,023.
(Factory default: 0)