Grass Valley ADVC-1000 User Manual

Page 13

Basic InstructionsBasic InstructionsBasic InstructionsBasic InstructionsBasic Instructions

Basic Instructions

Front Panel LEDs

xxxxx

Mode indicator (LED)

When only the “SDI J DV” LED is lit, ADVC-1000 converts the
SDI video signal, SDI embedded audio signal or AES/EBU
audio signal to a DV signal. When only the “DV J SDI” LED is
lit, ADVC-1000 converts the DV signal to an SDI video signal,
SDI embedded audio signal and AES/EBU audio signal.

xxxxx

STATUS LED

Off: ........................ 9-pin remote control is disabled.

Lit green: .............. 9-pin remote control is enabled.

Lit red: .................. 9-pin remote control was set to enabled, but

remote control is prevented by a communi-
cation error. Check that the 9-pin remote
cable is correctly connected, that the con-
nected device's power is ON, and that the
remote control setting has been enabled on
the connected device.

Flashing red: ........ A major ADVC-1000 operation error has oc-

curred, or several signals required for opera-
tion can't be detected. Check the error sta-
tus display screen. Input the required signals
correctly, or change ADVC-1000's settings.