Grass Valley 8985FS v.1.3.2 - Manual (Page 66)

66 8985FSP/FS — Instruction Manual
Software Updating
Frame Health Reports Link
Select the Frame Health Reports link to open the 8900NET module Frame
Alarm Reporting web page. This web page allows configuration of the
alarms and warnings that are reported to the external Frame Health Alarm
connector on the rear of the GeckoFlex frame.
LED Reports Link
Select the LED Reports link to open the 8900NET LED Reporting web page.
Normally, every module in the frame will report to the 8900NET module
any Fault, Signal Loss, Reference Loss, or Config Error conditions. These
conditions will be reflected by the status LEDs on the 8900NET module.
Using this web page, any of these conditions on this module and other
frame components such as the power supplies and fans, can be disabled
from being reported to the 8900NET module.
SNMP Trap Reports Link
Select the SNMP Trap Reports link to open the 8900NET SNMP Reporting
web page. This link will only be present when SNMP Agent software has
been installed on the 8900NET module. This web page allows configura-
tion of which alarms and warnings that are reported to the SNMP manage-
ment software.
Refer to the 8900NET Instruction Manual for complete details on using the
8900NET web pages.
Software Updating
Software updating of the 8985FSP/FS modules is done using the Net-
Config Networking Application PC option. This application is available
free of charge from the Grass Valley web site.
Software updating requires the presence of the 8900NET (Net Card)
module running software version 4.3.0. Refer to Software Requirements
on
page 11 for acquiring the latest version 8900NET software.
All modular product documentation can be found in PDF format on the
Grass Valley web site at this link:
www.grassvalley.com/docs/modular