Grass Valley 8985FS v.1.3.2 - Manual (Page 20)

20 8985FSP/FS — Instruction Manual
Installation
To install the fiber optic submodule:
1. Slide the fiber optic device into the metal fiber cage with the label and
handle to the right.
2. Push the device in as far as it will go without forcing it. It will not go
completely into the cage.
3. Cable the fiber optic connectors according to the instructions given in
Video Inputs
on page 22 and Video Outputs on page 22 .
Note Fiber inputs or outputs must be enabled in configuration.
Figure 6. Installing Fiber Optics Submodule
Removing an SFP Submodule
If you need to remove an SFP submodule, snap the handle out and pull the
submodule slowly out of the metal cage.
FIBER
J7
J9
J8
8431_03
r1
Label
Handle
Arrow Indicators:
SFP-13103G-M1DRX
SFP-13103G-M1DTX
SFP-13103G-M1TRX