Grass Valley 8985FS v.1.3.2 - Manual (Page 43)

8985FSP/FS — Instruction Manual 43
Configuration
While the module is re-initializing, a Waiting Page ( Figure 20 ) will appear
indicating the module is reconfiguring the input standard. Wait for the
operation to complete. Press the
Refresh button at the top of the page to
update the page.
Note Pressing the Defaults button or changing the input type with an E-MEM recall
may also cause the module to re-initialize.
Figure 20. Waiting Message
If the input standard selected is not present or not valid or not supported,
a warning message will report the problem on the System Config web page
as shown in
Figure 21 .
Figure 21. Input Standard Warning Message
Refresh button