Grass Valley 8921ADT - Manual (Page 35)

8921ADT Instruction Manual 35
Configuration
Analog Audio Inputs Page
The Analog Audio Inputs page ( Figure 12 ) reports the following for each of
the analog audio inputs:
• Presence of input signal (True = > – 40 DBFS)
• Clip status of input signal (True = > – 0.5 dBFS).
Set the maximum input level of each of the analog audio inputs from
0 to + 30 dBu with the Max Input Levels controls. Input levels can also be
adjusted in pairs (J7 and J8, J9, and J10) by selecting the corresponding
Locked checkbox and adjusting either level control in the pair.
Figure 12. 8921ADT Analog Audio Inputs Page
Use
this
link