Grass Valley LDK 4410 User Manual
Page 60
60
LDK 4410 + LDK 5420 3G Fiber Transmission System User’s Guide (v1.0)
Chapter 5 - Menus
Value
50.8.. 125.0 Hz (50 Hz) /
61.0 .. 150.0 Hz (60 Hz)
or
19.6 .. 7.9 ms (50 Hz) /
16.3 .. 6.6 ms (60 Hz)
Select clean scan frequency.
User 1
-
Units
Hz, mSec
Selects display units for clean scan.
User 1
-
Gain Preset
Gain - (dB)
-3dB, -6dB
Selects gain value for - preset.
User 2
Oper
Gain + (dB)
3dB, 6dB, 9dB
Selects gain value for + preset.
User 2
Oper
Gain ++ (dB)
6dB, 9dB, 12dB
Selects gain value for ++ preset.
User 2
Oper
AutoWhite
Awb Speed
0..99 (4)
Sets the speed for the auto white balance
procedure.
Service
-
Awb Gain
0..99 (10)
Sets the gain value for the auto white
balance procedure.
Service
-
Timing
H.Phase
0..99 (50)
Sets the horizontal phase output signal.
User 0
-
V-shift
Off, On
Turns V-shift on or off. Used to synchronize
the camera with DLP type projectors or to
hide the horizontal bar of CRT monitors.
Only available for a limited number of video
modes.
User 0
Scene
V-shift Level
0..99 (0)
Sets the variable video delay from 0 to 1
frame.
User 0
Scene
PCI id
0..8 (1)
Selects the ID for external PC operation.
Service
-
Main text insert
Auto, On, Off
Selects VF text insert mode:
Auto = inserts VF text into the main camera
signal when the camera is accessed from
the OCP 400 or MCP 400 control panels;
On = always inserts VF text;
Off = never inserts VF text.
User 3
-
HD-SDI(B) Video
Main, VF
Selects the output signal on the HD-SDI(B)/
VF connector:
Main: the main camera signal is output;
VF: the viewfinder signal (with markers,
indicators and text overlay) is output.
User 3
-
Buttons
Ext2 Assign
EXT2, EXT3
When set to EXT3, the EXT3 video input
from the base station is used when EXT2 is
selected in the camera.
User 0
Oper
SW1
Call, EXT1, EXT2
Assigns a function to Switch 1:
Call = generate Call signal;
EXT1 = switch VF to external signal 1;
EXT2 = switch VF to external signal 2.
User 0
Oper
SW1 Control
Mom., Alt.
Selects behaviour of Switch 1:
momentary or alternating..
User 0
Oper
Install
Values
Description
Level
File