Grass Valley LDK 4410 - Manual (Page 40)

40 LDK 4410 + LDK 5420 3G Fiber Transmission System User’s Guide (v1.0)
Chapter 4 - Transmission
On Air and ISO indicators
The red On Air indicator lights when the connected camera is switched On Air. The yellow ISO
indicator lights when the connected camera is in ISO mode.
Base station Ready indicator
This green indicator lights when the base station is operationally ready.
Camera Test indicator
This bi-color indicator lights red or yellow to indicate the camera and transmission status. Refer
to the table below for an explanation.
Camera Connected indicator
This green indicator lights when the camera is connected (and camera power is not switched
off by the OCP, MCP or base station menu).
Other indications of these situations:
1)
OCP: Cable LED flashes red; MCP: DIAGNOSE > - OPEN; Base station menu:
DIAGNOSTICS > COMMUNICATIONS > CAMERA CONNECTED - NO
2)
OCP: Cable LED red (continuously); MCP: DIAGNOSE > - SHORT; Base station menu:
DIAGNOSTICS > BOARD DIAGNOSTICS > POWER BOARD > STATUS
Camera
Connected ind. Camera

Test indicator Description or fault condition
Green flashing Off Transmission cable is connected to camera.
Green Off Transmission cable is connected to camera and camera is
powered.
Off Red flashing Transmission cable open.
1)
Off Red Transmission cable error: shortcircuit or wrong power system. 2)
Off Yellow Camera power is switched off by a control panel or from a menu.
Off Yellow Power shutdown sequence in progress
Off On Selftests are running