3 replacing base station air filter, Replacing base station air filter – Grass Valley LDK 4410 User Manual
Page 46
46
LDK 4410 + LDK 5420 3G Fiber Transmission System User’s Guide (v1.0)
Chapter 4 - Transmission
4.4.3 Replacing base station air filter
The air filter of the base station is located inside the side panel of the casing. When the air filter
is dirty, it needs to be replaced. Contact your local Grass Valley representative to purchase a
replacement air filter. Follow the steps below to replace the filter:
1.
Remove four screws from the left side panel.
2.
Pull out the bracket from the base station casing. The air filter is attached to the bracket.
3.
Unhook and remove the filter.
4.
Attach a clean air filter to the bracket.
5.
Slide the bracket together with the filter back into the base station.
6.
Fix the support with four screws.
Dust filter
(attached to the
support)