Grass Valley LDK 4410 - Manual (Page 25)

LDK 4410 + LDK 5420 3G Fiber Transmission System User’s Guide (v1.0) 25
Chapter 2 - Base station
• Select TOP to bring you back to the MAIN menu.
• Select PREVIOUS to go back to the menu that you were in before the current one.
The SYSTEM menu above shows the items displayed when you first enter the menu and the
other items that are available by scrolling up or down.
Leaving the menu
If you are deep within the menu structure, follow these steps to leave:
• If necessary move the cursor to the left most column.
• Scroll upwards until the cursor points to TOP (this is the main menu).
• Press the rotary/push button or the SELECT button on the OCP. The cursor now points to
the Menu off item of the MAIN menu.
• Press the rotary/push button or the SELECT button on the OCP to leave the system menu.
This is the recommended way of leaving the system menu. The menu system disappears after
a few seconds when you stop navigating. This delay can be set in the
MONITORING > MENU
menu. However, when you enter the system menu again you enter at the last position of the
cursor and not at the top of main menu. To prevent confusion the next time you enter the
system menu, it is advisable to leave the system menu by returning to the main menu (TOP)
and selecting MENU OFF.
Making changes
To find out where to change a function, consult “Base station menu” on page 47 to find out
under which menu group or subgroup the function is located. If the cursor points to an item
(and there are no double arrows to indicate a sub-menu) then the item pointed to has a value.
The value can be:
• a toggle value (only two values)
• a list value (more than two values)
• an analogue value (variable from 00 to 99)
• or unavailable (---).
If the value is unavailable it cannot be changed. This is indicated by three dashes (---). This can
occur, for example, when a function is switched off. The analogue values associated with that
function are then unavailable. If there are only two values associated with the function, then
Camera Number
Camera Power
MCP Available
Yellow On Air
Timing
Clock
Video Mode
Teleprompter
TOP
PREVIOUS
System
1
On
Yes
Std
10i59
Off