Grass Valley LDK 4410 - Manual (Page 29)

LDK 4410 + LDK 5420 3G Fiber Transmission System User’s Guide (v1.0) 29
Chapter 2 - Base station
2.4.3 Adjustment procedure for SD timing
The SD output signal can be delayed using the following procedure:
1. Enter the base station menu in service mode:

MONITORING > MENU > MENU LEVEL > INST > SERVICEMODE > EXEC > YES
2. After factory delivery there is a fixed minimum delay between HD and SD outputs:

SDTV > TIMING > COMP
3. Set the SDTV timing to variable:

SDTV > TIMING > VAR
4. Adjust the SD output delay using the following items:

SDTV > TIMING > SYNC SHIFT PIXELS and SHIFT LINES
☞
Note
☞
Note
The adjustment must be carried out for each video mode. The last setting for each mode is
memorized.


The CVBS viewing output is a non-standard output and the SD output delay adjustment does
not apply to this output.


HD-trilevel sync does not contain 4-field (NTSC) or 8-field (PAL) sequence information and
therefore will be random. If this is required black burst reference should be used.