3 attaching, 4 adjusting the shoulder pad, Attaching – Grass Valley LDK 4410 User Manual
Page 32: Adjusting the shoulder pad
32
LDK 4410 + LDK 5420 3G Fiber Transmission System User’s Guide (v1.0)
Chapter 3 - Camera adapter
3.1.3 Attaching
To attach the adapter to the camera head proceed as follows:
1.
Fit the guide pin at the top rear of the camera head and the guide pins on either side of
the camera connector into the corresponding slots (1 and 2) of the adapter.
2.
First, tighten the two horizontal screws (3) on the top of the camera head.
3.
Next, tighten the two horizontal screws (4) at the front of the camera head.
4.
Lastly, tighten the vertical screw (5) in the handgrip of the camera head.
3.1.4 Adjusting the shoulder pad
To change the position the shoulder pad press and hold lever (1). The shoulder pad can now be
moved backwards and forwards along the axis of the camera.
Tip
✎
Adjust the shoulder pad when all units are mounted to get the best balanced shoulder position.
5
1
4
3
2
1