Snmp reporting – Grass Valley 2031RDA-MM User Manual
Page 30

30
2031RDA-SM/-MM Instruction Manual
Status Monitoring
SNMP Reporting
The Kameleon Series system uses the Simple Network Monitoring Protocol
(SNMP) internet standard for reporting status information to remote mon-
itoring stations. When SNMP Agent software is installed on the 2000NET
module, enabled status reports are sent to an SNMP Manager such as the
Grass Valley’s NetCentral application.
There are both hardware and software report enable switches for each
report. Both must be enabled for the report to be sent. Software report
switches are set on the 2000NET Configuration page for the Frame, the
2000NET module, and each module slot. Refer to the 2000NET Network
Interface Instruction Manual for installation instructions.
This manual is related to the following products: