Grass Valley 2031RDA-MM - Manual (Page 15)

2031RDA-SM/-MM Instruction Manual 15
Configuration and Monitoring
Figure 6. Onboard Jumper Locations
8318_05
Jumper across pins 1–2
to lock out remote control.
Jumper across pins 2–3
to enable remote and
local control.
LOCAL
LOCAL
&
REMOTE
Pins 1–2 selects auto reclock.
Pins 2–3 forces bypass function.
Pins 2 only forces
270 Mb/s reclock.
Jumper J110 pins 1-2 to enable
the fiber TX output or pins 2-3
to disable the fiber output.
Jumper J112 pins 1-2 to enable
the electrical coax input or
pins 2-3 to enable the fiber input.
Remote Control Lockout
Reclocking Modes
J107
J107
J106
J110
J112
J106
J110
J112
Fiber Input Select/Fiber Tx Enable
BYPASS
270Mb
FIBER
TX EN
FIBER
INPUT
ELEC
INPUT
FIBER
TX DIS
AUTO
Pins 2-3
Pins 1-2
Pin 2 only
Jumper Positions for J106