2000net configuration, Wher, 2000net configuration web page – Grass Valley 2000NET v4.0.0 User Manual
Page 46
46
2000NET Instruction Manual
Using the 2000NET GUI
2000NET Configuration Web Page
The 2000NET Configuration web page provides the following:
•
A
reboot
button,
•
SNMP Agent setup installation,
•
An Asset Tag identifier field,
•
(2000T3 frame only) A Frame Health Reports link, and
•
An SNMP Trap Reports link.
Reboot Module
You may reboot the 2000NET module by selecting the
reboot
button at the
top of the page. A reboot can also be done on the 2000NET Network web
page.
SNMP Agent Installation
To use SNMP, the SNMP Agent software must be installed on the 2000NET
module. The 2000NET Configuration web page shown in
played if the agent software has not already been installed.
When SNMP Agent software is installed on the 2000NET module, enabled
status reports are sent to an SNMP Manager such as the Grass Valley’s Net-
Central application. Refer to
for more infor-
mation.
Figure 29. 2000NET Configuration Web Page
Use
this
link
2000T3 frame only