Grass Valley 2000NET v4.0.0 - Manual (Page 12)

12 2000NET Instruction Manual
Installation
Frame Health Alarm Connection
On a 3 RU frame, the Frame Health Alarm connection provides a relay
closure that will act as an alarm trigger for a user-supplied alarm circuit.
The relay is accessed through connector J103 SER3/GPI. Complete details
for cabling the Frame Health Alarm are given in the Installation section of
the Kameleon 2000 Frames Instruction Manual.
The Frame Health Alarm responds to conditions enabled on the 2000NET
Network Interface module with DIP switches S1 and S2 as given in
Table 3
on page 22 . This information from the module is also available over the
network to an SNMP monitoring system as described in SNMP Monitoring
on page 24 .