H3C Technologies H3C SecPath M9000 Series - Manual (Page 61)

53
For more information about the LPUs, see the card manuals that come with the LPUs. For more information
about transceiver modules available for the LPUs, see " Transceiver modules. "
NOTE:
A combo interface is a logical interface that comprises one fiber port and one copper port. The two ports
share one interface view and cannot work simultaneously. When you enable either port, the other port is
automatically disabled. You can activate either port as needed. The default operating port is the copper
port.
Switching fabric modules
CAUTION:
The switching fabric modules for M9000 gateways provide a console port for the H3C technical support
staff to maintain the gateways. Do not use the console port if you have not been trained for that.
The switching fabric modules are the core of the switching plane of the M9000 security gateway. Table
19 describes the compatibility matrix between the M9000 gateways and switching fabric module
models. You can install up to four switching fabric modules in one M9000 security gateway.
Table 19 Switching fabric module ordering guide
Chassis model Available switching fabric module model
M9006 NSQ1FAB04B0
M9010 NSQ1FAB08D0
M9014 NSQ1FAB12D0
Power modules
The gateway supports power modules of models LSUM2AC2500 and LSUM1DC2400. An
LSUM2AC2500 power module is an AC-input, DC-output power module that provides a maximum DC
output power of 2500 W. An LSUM1DC2400 power module is a DC-input, DC-output power module
that provides a maximum DC output power of 2400 W.
Table 20 LSUM2AC2500 and LSUM1DC2400 power module specifications
Item LSUM1AC2500 specifications LSUM1DC2400 specifications
Rated input voltage range 100 VAC to 240 VAC @ 50/60 Hz –48 VDC to –60 VDC
Rated output voltage 12 VDC 12 VDC
Maximum input current 16 A 60 A
Maximum output current
• 100 A (110 VAC)
• 208A (220 VAC)
200 A
Maximum output power
• 1200 W (110 VAC)
• 2500 W (220 VAC)
2400 W