H3C Technologies H3C SecPath M9000 Series - Manual (Page 34)

26
Figure 25 Connecting a console port to a terminal (M9006)
(1) Console port (2) Console cable
(3) Console terminal
Setting terminal parameters
To configure and manage the gateway, you must run a terminal emulator program on the console
terminal.
If your PC runs Windows 2003 Server, add the HyperTerminal component before performing the
following steps to log in to and manage the gateway. If your PC runs Windows 2008 server, Windows
7, Windows Vista, or any other operating system, prepare third-party terminal control software, and
follow the software user guide or help to configure the terminal.
The following are the required terminal settings:
• Bits per second—9,600
• Data bits—8
• Parity—None
• Stop bits—1
• Flow control—None
• Emulation—VT100
To set terminal parameters, for example, on a Windows XP HyperTerminal:
1. Select Start > All Programs > Accessories > Communications > HyperTerminal.
The Connection Description dialog box appears.
2. Enter the name of the new connection in the Name field and click OK.
1
2
3