beautypg.com

Installing a fan tray, Replacing an air filter – H3C Technologies H3C SecPath M9000 Series User Manual

Page 50

background image

42

Figure 36 Removing a fan tray

(1) Loosen the captive screws on the fan tray

(2) Take the fan tray out of the chassis

Installing a fan tray

1.

Unpack the fan tray.

2.

Holding the handle of the fan tray with one hand and supporting bottom with the other, gently slide

the fan tray along the guide rails into the slot until it is firmly secured in the slot.

3.

Fasten the captive screws on the fan tray.

Replacing an air filter

CAUTION:
•

Clean air filters every three months to guarantee adequate ventilation and avoid over-temperature.

•

Ensure electricity safety when replacing air filters on an operating gateway.

See also other documents in the category H3C Technologies Safety: