H3C Technologies H3C Intelligent Management Center - Manual (Page 36)

31
Figure 26 Component deployment information
NOTE:
After the auto-configuration server is deployed, the system will generate an Undeployed item. You can
increase the number of auto-configuration servers as needed to enhance iMC BIMS performance. You can
deploy at most 10 auto-configuration servers.
After deploying all necessary auto-configuration servers, on the master server select Start > All Programs
> H3C iMC BIMS > H3C Deployment Monitoring Agent. In the displayed window, select the Monitor tab
and click Start iMC BIMS. A dialog box appears asking you if you want to start all the processes of iMC
BIMS. Click OK. After all processes are started, iMC BIMS is ready for use.