H3C Technologies H3C Intelligent Management Center - Manual (Page 30)

25
Figure 19 Intelligent Deployment Monitoring Agent
To view the running information of each process, select the Process tab to enter the process management
window.
When iMC BIMS is started, deploy the auto-configuration server on the slave server.
Deploying the auto-configuration server
To deploy the auto-configuration server, install the iMC BIMS deployment monitoring agent first.
Following are prerequisites for deploying the auto-configuration server:
Java Runtime Environment (JRE) 6.0 is installed on the slave servers. You can download the JRE program
from http://www.oracle.com/technetwork/java/index.html, or use JRE 6.0 shipped with iMC BIMS. To
use JRE 6.0 in iMC BIMS, perform the following steps: On the slave server, launch the Web browser and
enter http://192.168.4.44:8080/imc in the address bar. On the login page, type the username and
password. Click Login to enter the Home tab. Select the System tab and click the If fail to start Remote
Installation Wizard, download and install JRE. link. In the popup jre.exe file download window, select
Save before running the file or directly click Run.